Long Ram Hydraulic Jack 12 Ton Double Pump Engine Lift Hoist Cherry

Long Ram Hydraulic Jack 12 Ton Double Pump Engine Lift Hoist Cherry Picker Features: This 12 ton capacity long plunger hydraulic jack helps you convert your existing hydraulic crane to a convenient and fast crane. Mounts directly to most shop cranes. Vertical use only. Operates 12 tons/26455 lbs. 26"-45.7" lifting range: minimum height: 26 inches/66 cm. Maximum height: 45.7 inches/116 cm. The Long Ram Hydraulic Round Bottom Jack provides ample 19.7" / 50 cm stroke to lift up to 12 tons / 26,455 lbs. RELIABLE AND DURABLE JACK: The large diameter hydraulic steel cylinder unit reduces the oil pressure required to move the load, helping to minimize wear and prolong service life. The piston plunger is treated and polished to prevent scratching and features a Y-type urethane seal with a backup ring that prevents the load from dropping slowly or drifting around the oil. Specifications:

Tonnage: 12T

Specification: Double Pump

Color: red

Material: cast iron

Installation: bottom earrings

Minimum height:660MM

Maximum height:1160MM

Lifting height stroke:500MM

Net weight:11KG

Upper hole diameter:20MM

Diameter of lower hole:17MM

Distance between two holes:630MM

Piston rod diameter: 33MM

Outer Cylinder Diameter:80MM

Tip:  The products have CE, UKCA certificates. Package:

1x jack

1x Handle

1. We accept PayPal, G Pay, VISA, Master Card which permitted by ebay. 2.Please contact us first to solve if there is any problem about item before left feedback, many thanks. 1. All stock is based in US and will be dispatched within 24 hours after payment. 2. PO BOX address is not acceptable. 3. Normally delivered within 5~8 working days. 4. Returns are accepted within 30 days of purchase. 1. Please message us through eBay if you have any questions. 2. All emails and messages will be replied to ASAP during open hours. 3. From Monday to Friday 9.00am - 6.00pm. 4. If you have any quality problems or you are not pleased with the purchase, please contact us through email. 5. We will be happy to assist you if if any item needs to be returned or replaced. Features: This 12 ton capacity long plunger hydraulic jack helps you convert your existing hydraulic crane to a convenient and fast crane. Mounts directly to most shop cranes. Vertical use only. Operates 12 tons/26455 lbs. 26"-45.7" lifting range: minimum height: 26 inches/66 cm. Maximum height: 45.7 inches/116 cm. The Long Ram Hydraulic Round Bottom Jack provides ample 19.7" / 50 cm stroke to lift up to 12 tons / 26,455 lbs. RELIABLE AND DURABLE JACK: The large diameter hydraulic steel cylinder unit reduces the oil pressure required to move the load, helping to minimize wear and prolong service life. The piston plunger is treated and polished to prevent scratching and features a Y-type urethane seal with a backup ring that prevents the load from dropping slowly or drifting around the oil. Specifications:

Tonnage: 12T

Specification: Double Pump

Color: red

Material: cast iron

Installation: bottom earrings

Minimum height:660MM

Maximum height:1160MM

Lifting height stroke:500MM

Net weight:11KG

Upper hole diameter:20MM

Diameter of lower hole:17MM

Distance between two holes:630MM

Piston rod diameter: 33MM

Outer Cylinder Diameter:80MM

Tip:  The products have CE, UKCA certificates. Package:

1x jack

1x Handle

Returns Accepted for this item if it's within 30 Days